1-Port Clear Channel Ds3/E3 Gpim Components; Figure 16: 1-Port Clear Channel Ds3/E3 Gpim Front Panel; Table 42: 1-Port Clear Channel Ds3/E3 Gpim Components - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference
Related
Documentation

1-Port Clear Channel DS3/E3 GPIM Components

76

Figure 16: 1-Port Clear Channel DS3/E3 GPIM Front Panel

NOTE: Only the SRX650 Services Gateway supports hot-swappable
functionality for GPIMs. The SRX550 Services Gateway does not support
hot-swappable functionality for GPIMs.
1-Port Clear Channel DS3/E3 GPIM Hardware Specifications on page 78
1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications on page 24
1-Port Clear Channel DS3/E3 GPIM Supported Standards on page 80
1-Port Clear Channel DS3/E3 GPIM Key Features on page 77
1-Port Clear Channel DS3/E3 GPIM LEDs on page 79
1-Port Clear Channel DS3/E3 GPIM Components on page 76
1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics on page 80
1-Port Clear Channel DS3/E3 GPIM Basic Configuration on page 221
Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services
Gateway on page 256
The 1-Port Clear Channel DS3/E3 GPIM contains the components listed in
Table 42 on page 76.

Table 42: 1-Port Clear Channel DS3/E3 GPIM Components

Component
ONLINE/OFFLINE button
Only the SRX650 Services
Gateway supports
hot-swappable functionality
for GPIMs. The SRX550
Services Gateway does not
support hot-swappable
functionality for GPIMs.
Location
Right side of the GPIM
Copyright © 2015, Juniper Networks, Inc.
Description
Use the ONLINE/OFFLINE
button to gracefully shut down
the GPIM. Press down and hold
the button for 4 to 5 seconds;
then release. The GPIM
gracefully shuts down and
turns off the power supply
units (PSUs).
To power up the GPIM (if the
Services and Routing Engine
[SRE] is off), press and hold
the ONLINE/OFFLINE button
for 4 to 5 seconds.