Quad Ct1/E1 Gpim Components; Table 67: Quad Ct1/E1 Gpim Components - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference

Quad CT1/E1 GPIM Components

Related
Documentation
122
Quad CT1/E1 GPIM Network Interface Specifications on page 28
Quad CT1/E1 GPIM Hardware Specifications on page 123
Quad CT1/E1 GPIM LEDs on page 124
Quad CT1/E1 GPIM Components on page 122
Quad CT1/E1 GPIM Basic Configuration on page 238
Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services
Gateway on page 256
The Quad CT1/E1 Gigabit-Backplane Physical Interface Module (GPIM) contains the
components listed in Table 67 on page

Table 67: Quad CT1/E1 GPIM Components

Component Location
GPIM Right side of the GPIM
ONLINE/OFFLINE
button
Only the SRX650
Services Gateway
supports
hot-swappable
functionality for
GPIMs. The SRX550
Services Gateway
does not support
hot-swappable
functionality for
GPIMs.
Four fixed T1/E1 ports Middle of the GPIM
labeled 0–3
Each port can be
configured using the
CLI in T1 or E1 mode.
Captive screws One on each side of
the GPIM
Quad CT1/E1 GPIM Overview on page 121
Quad CT1/E1 GPIM Key Features on page 123
Quad CT1/E1 GPIM Network Interface Specifications on page 28
Quad CT1/E1 GPIM Hardware Specifications on page 123
Quad CT1/E1 GPIM LEDs on page 124
122.
Description
Use the GPIM ONLINE/OFFLINE button to
gracefully shut down the GPIM.
T1 Mode:
Transmit bit rate:
1.544 Mbps
Receive bit rate:
1.544 Mbps
Use the captive screws to hold the GPIM in
place in the services gateway.
Copyright © 2015, Juniper Networks, Inc.
E1 Mode:
Transmit bit rate:
2.048 Mbps
Receive bit rate:
2.048 Mbps