1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications
Related
Documentation
1-Port ADSL2+ Mini-Physical Interface Module LEDs
Copyright © 2015, Juniper Networks, Inc.
1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration on page 209
Table 29 on page 47
gives the physical specifications of the 1-Port ADSL2+ Mini-Physical
Interface Module (Mini-PIM).
Table 29: 1-Port ADSL2+ Mini-PIM Specifications
Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
Environmental operating temperature
Storage temperature
Relative humidity
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45
1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 21
1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 46
1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 47
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics on
page 49
1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration on page 209
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) has two LEDs.
Table 30 on page 48
describes the LED states.
Chapter 5: 1-Port ADSL2+ Mini-Physical Interface Module
Value
3.75 in. x 5.9 in. x 0.80 in.
(9.5 cm x 14.5 cm x 2.0 cm)
2.72 oz (77 g)
RJ-11
Mini-PIM
32°F through 104°F (0°C through 40°C)
–40°F through 158°F (–40°C through 70°C)
5% to 90% noncondensing
47