Physical Interface Modules Supported On Srx Series Services Gateways - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference
Related
Documentation

Physical Interface Modules Supported on SRX Series Services Gateways

6
Table 3: SRX Series Services Gateway Interface Port Number
Examples (continued)
Interface Type
Dual CT1/E1 GPIM
Quad CT1/E1 GPIM
Installing a Double-High, Double-Wide Gigabit-Backplane Physical Interface Module
on the SRX Series Services Gateway on page 258
SRX Series Services Gateway Mini-Physical Interface Modules Overview on page 7
SRX Series Services Gateway Gigabit-Backplane Physical Interface Modules Overview
on page 8
Physical Interface Modules Supported on SRX Series Services Gateways on page 6
SRX Series Services Gateway Interface Modules and Compatibility on page 11
SRX Series Services Gateway Interfaces Power and Heat Requirements on page 17
The SRX Series Services Gateways support the following Mini-Physical Interface Modules
(Mini-PIMs):
1-Port small form-factor pluggable (SFP)
1-Port Gigabit Ethernet small form-factor pluggable (SFP)
ADSL2+
DOCSIS
G.SHDSL
Serial
T1/E1
VDSL2
The SRX Series Services Gateways support the following Gigabit-Backplane Physical
Interface Modules (GPIMs/XPIMs):
Dual CT1/E1 GPIM
Quad CT1/E1 GPIM
1-Port Clear Channel DS3/E3 GPIM
8-Port Serial GPIM
2-Port 10-Gigabit Ethernet XPIM
Interface Number Example
ct1–1/0/0
ce1–1/0/0
ct1–1/0/0
ce1–1/0/0
Copyright © 2015, Juniper Networks, Inc.