Specifications; 1-Port G.shdsl 8-Wire Mini-Physical Interface Module Leds; Table 33: 1-Port G.shdsl 8-Wire Mini-Pim Physical Specifications; Table 34: 1-Port G.shdsl Mini-Pim Led States - Juniper SRX Series Manual

1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Hardware Specifications
Related
Documentation

1-Port G.SHDSL 8-Wire Mini-Physical Interface Module LEDs

Copyright © 2015, Juniper Networks, Inc.
Table 33 on page 59 describes the physical specifications of the 1-Port G.SHDSL 8-Wire
Mini-Physical Interface Module (Mini-PIM).

Table 33: 1-Port G.SHDSL 8-Wire Mini-PIM Physical Specifications

Description
Dimensions (H x W x D)
Weight
Connector type
Form factor
Environmental operating temperature
Storage temperature
Relative humidity
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Overview on page 57
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Supported Standards on page 60
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes on page 241
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Key Features on page 58
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module LEDs on page 59
The 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module (Mini-PIM) has the following
LEDs to indicate the state of the Mini-PIM and its four ports (one LED for each port).
Table 34 on page 59 describes the LED states.

Table 34: 1-Port G.SHDSL Mini-PIM LED States

Name Color
STATUS Green
Yellow
Red
Chapter 7: 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module
Value
0.8 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm)
5.28 oz (150 g)
RJ-45
Mini-PIM
32°F through 104°F (0°C through 40°C)
–40°F through 158°F (–40°C through 70°C)
5% to 90% noncondensing
State Description
On Port is online with no alarms or failures
On Port is initializing
On Port has detected an alarm
59