1-Port T1/E1 Mini-Physical Interface Module Supported Standards; Diagnostics - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference

1-Port T1/E1 Mini-Physical Interface Module Supported Standards

Related
Documentation
1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics
68
1-Port T1/E1 Mini-Physical Interface Module Basic Configuration on page 215
The 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM) supports the following
standards:
ANSI TI.107, TI.102
GR 499-core, GR 253-core
AT&T Pub 54014
ITU G.751, G.703
1-Port T1/E1 Mini-Physical Interface Module Overview on page 65
1-Port T1/E1 Mini-Physical Interface Module Hardware Specifications on page 66
1-Port T1/E1 Mini-Physical Interface Module Network Interface Specifications on page 23
1-Port T1/E1 Mini-Physical Interface Module Key Features on page 66
1-Port T1/E1 Mini-Physical Interface Module LEDs on page 67
1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics on page 68
1-Port T1/E1 Mini-Physical Interface Module Basic Configuration on page 215
The 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM) has the following loopback

diagnostics:

Local, remote, payload
Test patterns (BERT)
All ones
All zeros
Alternating ones and zeros (AA/55)
1:3 or 1-in-4 pattern
1:7 or 1-in-8 pattern
3:24 - 3 bits set in every 24 bits
QRSS20 (Modified PRBS 2^20-1, with 14 zero suppression)
PRBS 2^7-1 - PRBS 2^9-1 (as specified in ITU-T O.153)
PRBS 2^11-1 (as specified in ITU-T O.153)/2047 pattern
PRBS 2^15-1 (as specified in ITU-T O.151/O.153)
Copyright © 2015, Juniper Networks, Inc.