2-Port 10-Gigabit Ethernet Xpim Hardware Specifications; Table 47: 2-Port 10-Gigabit Ethernet Xpim Hardware Specifications - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference

2-Port 10-Gigabit Ethernet XPIM Hardware Specifications

Related
Documentation
88
The 2-Port 10-Gigabit Ethernet XPIM has the hardware specifications listed in
Table 47 on page 88.

Table 47: 2-Port 10-Gigabit Ethernet XPIM Hardware Specifications

Description
Dimensions (H x W x L)
Weight
Connector Types
Supported SFPs
Form factor
Environmental operating temperature
Storage temperature
Relative humidity
Power consumption
Throughput
2-Port 10-Gigabit Ethernet XPIM Overview on page 83
2-Port 10-Gigabit Ethernet XPIM Key Features on page 86
2-Port 10-Gigabit Ethernet XPIM LEDs on page 89
Value
.78 in. H x 6.72 in. W x 8.01 in. L
(1.98 cm x 17.08 cm x 20.57 cm)
18.6 oz (.53 kg)
Contains a total of four ports:
Two SFP+ fiber ports
Two 10 G Base-T copper ports
Port 0 is grouped as one copper port and one
fiber port, and port 1 is grouped as one copper
port and one fiber port. Mixing and matching
between the copper and fiber ports is
supported.
Receives SFP+ optics and, at a minimum,
supports these SFP+ transceivers:
SFPP-10GE-SR
SFPP-10GE-LR
SFPP-10GE-ER
SFPP-10GE-LRM
Copper Twin-AX 1m
Copper Twin-AX 3m
Single-high, single-wide XPIM
32°F through 104°F (0°C through 40°C)
–40°F through 158°F (–40°C through 70°C)
5% to 90% noncondensing
Estimated at 20 W
7.5 Gbps across two ports in routed mode
Copyright © 2015, Juniper Networks, Inc.