Dual Ct1/E1 Gpim Components; Table 64: Dual Ct1/E1 Gpim Components - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference
Related
Documentation

Dual CT1/E1 GPIM Components

Related
Documentation
118
Dual CT1/E1 GPIM Key Features on page 119
Dual CT1/E1 GPIM Network Interface Specifications on page 27
Dual CT1/E1 GPIM Hardware Specifications on page 119
Dual CT1/E1 GPIM LEDs on page 120
Dual CT1/E1 GPIM Components on page 118
Dual CT1/E1 GPIM Basic Configuration on page 235
Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services
Gateway on page 256
The Dual CT1/E1 Gigabit-Backplane Physical Interface Module (GPIM) contains the
components listed in Table 64 on page

Table 64: Dual CT1/E1 GPIM Components

Component Location
GPIM Right side of the GPIM
ONLINE/OFFLINE
button
Only the SRX650
Services Gateway
supports
hot-swappable
functionality for
GPIMs. The SRX550
Services Gateway
does not support
hot-swappable
functionality for
GPIMs.
Two fixed T1/E1 ports Middle of the GPIM
labeled 0 and 1
Each port can be
configured using the
CLI in T1 or E1 mode.
Captive screws One on each side of
the GPIM
Dual CT1/E1 GPIM Overview on page 117
Dual CT1/E1 GPIM Key Features on page 119
Dual CT1/E1 GPIM Network Interface Specifications on page 27
Dual CT1/E1 GPIM Hardware Specifications on page 119
118.
Description
Use the GPIM ONLINE/OFFLINE button to
gracefully shut down the GPIM.
T1 Mode:
Transmit bit rate:
1.544 Mbps
Receive bit rate:
1.544 Mbps
Use the captive screws to hold the GPIM in
place in the services gateway.
Copyright © 2015, Juniper Networks, Inc.
E1 Mode:
Transmit bit rate:
2.048 Mbps
Receive bit rate:
2.048 Mbps