1-Port Serial Mini-Physical Interface Module Key Features; 1-Port Serial Mini-Physical Interface Module Hardware Specifications; Table 35: 1-Port Serial Mini-Pim Physical Specifications - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference

1-Port Serial Mini-Physical Interface Module Key Features

Related
Documentation

1-Port Serial Mini-Physical Interface Module Hardware Specifications

Related
Documentation
62
The 1-Port Serial Mini-Physical Interface Module (Mini-PIM) provides the following key
features:
Autoselection of operational modes based on DTE or DCE cables
Local and remote loopback diagnostics
Configurable clock rate for the transmit (TX) clock and receive (RX) clock
Complete configuration and management by using the CLI and the J-Web interface
1-Port Serial Mini-Physical Interface Module Overview on page 61
1-Port Serial Mini-Physical Interface Module Hardware Specifications on page 62
1-Port Serial Mini-Physical Interface Module Supported Standards on page 63
MTU Default and Maximum Values for Physical Interface Modules on page 12
1-Port Serial Mini-Physical Interface Module LEDs on page 63
1-Port Serial Mini-Physical Interface Module Basic Configuration on page 214
Table 35 on page 62 gives the physical specifications of the 1-Port Serial Mini-Physical
Interface Module (Mini-PIM).

Table 35: 1-Port Serial Mini-PIM Physical Specifications

Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
1-Port Serial Mini-Physical Interface Module Overview on page 61
1-Port Serial Mini-Physical Interface Module Supported Standards on page 63
1-Port Serial Mini-Physical Interface Module Key Features on page 62
1-Port Serial Mini-Physical Interface Module LEDs on page 63
1-Port Serial Mini-Physical Interface Module Basic Configuration on page 214
Value
0.8 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm)
3.04 oz (86 g)
60-pin Synchronous Serial (female)
Mini-PIM
Copyright © 2015, Juniper Networks, Inc.