1-Port T1/E1 Mini-Physical Interface Module Leds; Table 38: 1-Port T1/E1 Mini-Pim Led States - Juniper SRX Series Manual

Related
Documentation

1-Port T1/E1 Mini-Physical Interface Module LEDs

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Table 37: 1-Port T1/E1 Mini-PIM Physical Specifications (continued)
Description
Relative humidity
1-Port T1/E1 Mini-Physical Interface Module Overview on page 65
1-Port T1/E1 Mini-Physical Interface Module Network Interface Specifications on page 23
1-Port T1/E1 Mini-Physical Interface Module Supported Standards on page 68
1-Port T1/E1 Mini-Physical Interface Module Key Features on page 66
1-Port T1/E1 Mini-Physical Interface Module LEDs on page 67
1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics on page 68
1-Port T1/E1 Mini-Physical Interface Module Basic Configuration on page 215
The 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM) has three LEDs.
Table 38 on page 67 describes the LED states.

Table 38: 1-Port T1/E1 Mini-PIM LED States

LED Color
ALARM Yellow
LOOPBACK Yellow
CD (Carrier Green
Detector)
1-Port T1/E1 Mini-Physical Interface Module Overview on page 65
1-Port T1/E1 Mini-Physical Interface Module Hardware Specifications on page 66
1-Port T1/E1 Mini-Physical Interface Module Network Interface Specifications on page 23
1-Port T1/E1 Mini-Physical Interface Module Supported Standards on page 68
1-Port T1/E1 Mini-Physical Interface Module Key Features on page 66
1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics on page 68
Chapter 9: 1-Port T1/E1 Mini-Physical Interface Module
Value
5% to 90% noncondensing
State Description
On Indicates that there is a local or remote
alarm; device has detected a failure.
Off Indicates that there are no alarms or failures.
On Indicates that a loopback or line state is
detected.
Off Indicates that the loopback is not active.
On Indicates that the Mini-PIM link is up.
Off Indicates that carrier detect is not active.
67