1-Port Vdsl2 (Annex A) Mini-Physical Interface Module Leds; Table 39: 1-Port Vdsl2 (Annex A) Mini-Pim Hardware Specifications; Table 40: 1-Port Vdsl2 (Annex A) Mini-Pim Led States - Juniper SRX Series Manual

Related
Documentation

1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.

Table 39: 1-Port VDSL2 (Annex A) Mini-PIM Hardware Specifications

Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
Environmental operating temperature
Storage temperature
Relative humidity
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Overview on page 71
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features on page 72
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles on page 74
1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs on page 73
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Cable Specifications on page 141
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Basic Configuration on page 217
The 1-Port VDSL2 (Annex A) Mini-Physical Interface Module (Mini-PIM) has two LEDs.
Table 40 on page 73 describes the LED states.

Table 40: 1-Port VDSL2 (Annex A) Mini-PIM LED States

LED Color
SYNC Green
TX/RX Green
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Overview on page 71
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features on page 72
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles on page 74
Chapter 10: 1-Port VDSL2 (Annex A) Mini-Physical Interface Module
Value
3.75 in. x 5.9 in. x 0.80 in.
(9.5 cm x 14.5 cm x 2.0 cm)
4.0 oz (114 g)
RJ-11
Mini-PIM
32°F through 113°F (0°C through 45°C)
–40°F through 158°F (–40°C through 70°C)
5% to 90% noncondensing
State Description
On Indicates that the VDSL interface is trained.
Blinking Indicates training is in progress.
Blinking Indicates that traffic is passing through.
Off Indicates that no traffic is passing through.
73