16-Port Gigabit Ethernet Xpim (Poe) Components; 16-Port Gigabit Ethernet Xpim (Poe) Hardware Specifications; Table 14: 16-Port Gigabit Ethernet Xpim Components; Table 15: 16-Port Gigabit Ethernet Xpim Hardware Specifications - Juniper SRX550 Hardware Manual

SRX550 High Memory Services Gateway Hardware Guide

16-Port Gigabit Ethernet XPIM (PoE) Components

16-Port Gigabit Ethernet XPIM (PoE) Hardware Specifications

30
Maximum module power of 40 W without PoE
JTAG support for boundary scan test
The 16-Port Gigabit Ethernet XPIM contains the components listed in

Table 14: 16-Port Gigabit Ethernet XPIM Components

Component
XPIM ONLINE/OFFLINE button
The SRX550 High Memory
Services Gateway does not
support hot-swappable
functionality for GPIMs.
16 PoE ports labeled 0 to 15
Captive screws
Handles
Table 15 on page 30 provides the specifications for the 16-Port Gigabit Ethernet XPIM.

Table 15: 16-Port Gigabit Ethernet XPIM Hardware Specifications

Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
Environmental operating temperature
Storage temperature
Relative humidity
Location
Right side of the XPIM
Middle of the XPIM
One on each side of the XPIM
One on each side of the XPIM
Value
1.58 in. x 6.72 in. x 8.5 in.
(4.0 cm x 17.1 cm x 21.6 cm)
16.5 oz (0.68 kg)
16 RJ-45
Double-high, single-wide XPIM
32° F through 104° F (0° C through 40° C)
-40° F through 158° F (-40° C through 70° C)
5% to 90% noncondensing
Copyright © 2016, Juniper Networks, Inc.
Table 14 on page 30.
Description
Use the XPIM
ONLINE/OFFLINE button to
gracefully shut down the XPIM.
Each port on the 16-Port
Gigabit Ethernet with PoE
XPIM supports Power over
Ethernet (PoE).
Use the captive screws to hold
the XPIM in place in the
services gateway.
Use the handles to grasp the
XPIM for installation or
removal.