®
Junos
Pulse Gateway Hardware Guide
Table 16: CMC Front Panel
Number
1
2
3
4
5
Status LEDs on the Junos Pulse Gateway
Related
Documentation
Ethernet Port LEDs on the Junos Pulse Gateway
22
Component
Console
Ethernet ports 0 (em0) and 1 (em1)
USB port
LEDs (power, activity, alarm)
Power button
Power, activity, and alarm LEDs are located on the front panel of the service modules.
These LEDs can be monitored to view the current status of the module. In addition, the
MAG6610 and MAG6611 have hard drive and RAID status LEDs located on the back panel.
For more information, see
"Monitoring the Junos Pulse Gateway Components Using LEDs"
on page
99.
Junos Pulse Gateway Features and Functions on page 4
Ethernet Port LEDs on the Junos Pulse Gateway on page 22
Each Gigabit Ethernet port has two LEDs, as shown in
Figure 14: Junos Pulse Gateway Ethernet Port LEDs
Table 17 on page 22
describes the built-in Ethernet port LEDs.
Table 17: Ethernet Port LEDs
Number
Function
1
Link/Activity
Color
Description
Blinking Green
Link is active. Data communication is taking
place.
Green
Link is active. No data communication is
taking place.
Figure 14 on page
22.
Copyright © 2014, Juniper Networks, Inc.