Table of Contents
Advertisement
User-configuration of fiber and copper ports:
When the interface is configured as a copper port, typical Ethernet configuration such as autonegotiation
is supported. Forced rate and link mode are allowed. Four forced and autonegotiation rates are provided:
10 G and 1 G. Autonegotiation is required to establish link when rates are 1 G and 10 G. Copper ports
support autonegotiation; whereas fiber ports do not support autonegotiation.
NOTE:
The 1 G fiber port configuration is supported starting with Junos OS Release 10.2R2.
The 10 G fiber port does not support autonegotiation.
When the interface is configured as a fiber port, typical configurations similar to the 1 Gbps fiber (SFP)
ports in the 24-Port Gigabit Ethernet XPIM are supported. See
Overview" on page 111
Diagnostics for debugging and problem isolation.
Operates in routed mode.
SNMP support.
J-Web support.
RELATED DOCUMENTATION
2-Port 10-Gigabit Ethernet XPIM Overview | 83
2-Port 10 Gigabit Ethernet XPIM Hardware Specifications | 88
2-Port 10 Gigabit Ethernet XPIM LEDs | 90
2-Port 10-Gigabit Ethernet XPIM Components | 84
2-Port 10-Gigabit Ethernet XPIM Basic Configuration | 217
2-Port 10 Gigabit Ethernet XPIM Hardware Specifications
The 2-Port 10 Gigabit Ethernet XPIM has the hardware specifications listed in
Table 45: 2-Port 10 Gigabit Ethernet XPIM Hardware Specifications
Description
Dimensions (H x W x L)
for more details.
"24-Port Gigabit Ethernet XPIM
Value
.78 in. H x 6.72 in. W x 8.01 in. L
(1.98 cm x 17.08 cm x 20.57 cm)
Table 45 on page
88.
88
Advertisement
Table of Contents
