2-Port 10-Gigabit Ethernet Xpim Key Features - Juniper SRX Series Manual

RELATED DOCUMENTATION
2-Port 10-Gigabit Ethernet XPIM Overview | 83

2-Port 10-Gigabit Ethernet XPIM Key Features | 87

2-Port 10 Gigabit Ethernet XPIM Hardware Specifications | 88
2-Port 10 Gigabit Ethernet XPIM LEDs | 90
2-Port 10-Gigabit Ethernet XPIM Basic Configuration | 217
2-Port 10-Gigabit Ethernet XPIM Key Features
The 2-Port 10-Gigabit Ethernet XPIM supports the following key features:
Contains a total of four ports:
Two SFP+ fiber ports
Two 10 G Base-T copper ports
Only two of the four ports can be active at the same time (one from port group 0 and one from port
group 1). Mixing and matching between the copper and fiber port types is supported.
Receives SFP+ optics and, at a minimum, supports these SFP+ transceivers:
SFPP-10GE-SR
SFPP-10GE-LR
SFPP-10GE-ER
SFPP-10GE-LRM
Copper Twin-AX 1m
Copper Twin-AX 3m
Copper Twin-AX 5m
Copper Twin-AX 7m
NOTE: The 2-Port 10-Gigabit Ethernet XPIM does not support 1GE SFP transceivers.
Anti-counterfeit capabilities.
Quad speed support for copper mode: 10GBase-T IEEE 820.3an, 1000Base-T IEEE 802.3ab, 100Base-T
IEEE 802.3u, and 10Base-T IEEE 802.3.
Standard quality of service (QoS) features.
87