Installing The Mini Perc Adaptor Board - Dell EMC PowerEdge XE7440 Installation And Service Manual

Steps
1. Remove the three screws securing the mini PERC adapter board to mini PERC module.
2. Lift the mini PERC adaptor board from the mini PERC module.
Figure 35. Removing the mini PERC adaptor board
Next steps
Install the mini PERC adaptor board.

Installing the mini PERC adaptor board

Prerequisites
Follow the safety guidelines listed in the Safety instructions.
Steps
1. Insert the mini PERC adaptor board into mini PERC module.
2. Secure the mini PERC adaptor board by tightening the three screws.
70 Installing and removing system components