Removing The Air Shroud (Fh Sled); Installing The Air Shroud - Dell EMC PowerEdge XE7440 Installation And Service Manual

Removing the air shroud (FH sled)

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
Steps
Hold the edges of the air shroud and lift the air shroud out of the system.
Figure 16. Removing the air shroud (FH sled)
Next steps
Install the shroud (FH sled).

Installing the air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Steps
1. Push down the retention clip and press the min PERC card battery into the air shroud
2. Hold the touch points and install the air shroud into sled.
50 Installing and removing system components
Safety instructions.
Before working inside your
Safety instructions.
Before working inside your
system.
system.