Network Daughter Card; Removing The Ocp Card - Dell EMC PowerEdge XE7440 Installation And Service Manual

Figure 36. Installing the mini PERC adaptor board
Next steps
1. Install the mini PERC
2. Install the PCIe dummy
3. Install the air shroud.
4. Install the sled.
5. Follow the procedure listed in

Network daughter card

Removing the OCP card

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
4. Remove the air shroud.
5. Remove the PCIe dummy
6. Remove the mini PERC
card.
bracket.
After working inside the
Safety
Before working inside your
bracket.
module.
system.
instructions.
system.
Installing and removing system components 71