Table of Contents
Advertisement
Figure 28. Removing the mini PERC card
Next steps
Install the mini PERC
card.
Installing the mini PERC card
Prerequisites
1. Follow the safety guidelines listed in the
2. If installing a new PERC card, unpack it and prepare the card for installation.
NOTE:
For instructions, see the documentation accompanying the card.
Steps
1. Align and insert the mini PERC card into the hook of mini PERC bracket.
2. Install the mini PERC cable into the mini PERC card and tighten two captive screws to secure the mini PERC cable.
3. Connect the mini PERC battery cable to mini PERC card.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Safety
instructions.
Installing and removing system components
63
Hide quick links:
Advertisement
Table of Contents
