Mini Perc Card Battery; Removing The Mini Perc Card Battery - Dell EMC PowerEdge XE7440 Installation And Service Manual

Figure 30. Installing the mini PERC card module
Next steps
1. Install the PCIe dummy
2. Install the air shroud.
3. Install the sled.
4. Follow the procedure listed in

Mini PERC card battery

Removing the mini PERC card battery

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
4. Remove the air shroud.
5. Remove the PCIe dummy
6. Remove the mini PERC
Steps
Disconnect the mini PERC card battery cable from mini PERC card.
bracket.
After working inside your
Safety instruction.
Before working inside your
bracket.
module.
system.
system.
Installing and removing system components 65