Installing The Motherboard Bridge Board (1) - Dell EMC PowerEdge XE7440 Installation And Service Manual

5. Remove the PCIe dummy
6. Remove the mini PERC card
7. Remove the cooling fans.
8. Remove the motherboard bridge
9. Remove the the motherboard interposer
10. Remove the sled cables
Steps
1. Using the Phillips #2 screwdriver, remove the three screws that secure the motherboard bridge board (1) to the
motherboard bridge module.
2. Lift the motherboard bridge board (1) out of the motherboard bridge module bracket.
Figure 49. Removing the Motherboard bridge board (1)
Next steps
Install the motherboard bridge board

Installing the Motherboard bridge board (1)

Prerequisites
Follow the safety guidelines listed in the
Steps
1. Align and install motherboard bridge board (1) into the motherboard bridge module bracket.
2. Using the Phillips #2 screwdriver, secure the motherboard bridge board (1) to the module bracket with three screws.
bracket.
module.
module.
board.
kit.
(1).
Safety instructions.
Installing and removing system components 83