Installing The Adapter Perc - Dell VCG3C Assembly, Installation And Service Manual

Figure 63. Removing the adapter PERC
Next steps
Replace the adapter PERC.

Installing the adapter PERC

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the air shroud.
4. Remove the expansion card
Steps
1. Connect the SAS cables to the adapter PERC.
2. Holding the card by its edges, insert the adapter PERC to connect it to the connector on the riser.
Safety instructions.
Before working inside your
riser.
system.
Installing and removing system components 67