Pcie Dummy Bracket; Removing The Pcie Dummy Bracket - Dell EMC PowerEdge XE7440 Installation And Service Manual

Figure 20. Installing a cooling fan
Next steps
1. If required, Install the air shroud (FH
2. Install the air shroud.
3. Install the sled.
4. Follow the procedure listed in

PCIe dummy bracket

Removing the PCIe dummy bracket

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
Steps
1. Using the Phillips #1 screwdriver, remove the three screws that secure the PCIe dummy bracket to the sled.
2. Pull out the PCIe dummy bracket form the sled.
54 Installing and removing system components
sled).
After working inside your
Safety instructions.
Before working inside your
system.
system.