Installing the FHFL interposer board
Prerequisites
Follow the safety guidelines listed in the
Safety
instructions.
Steps
1. Align and insert the FHFL interposer board into FH riser board. Press until the FHFL interposer board clicks into place.
2. Using the Phillips #2 screwdriver, secure the FHFL interposer board to the FH riser module with two screws.
Figure 68. Installing the FHFL interposer board
3. Install the FH riser module into the PCIe slot of system board. Press until the FH riser module clicks into place.
4. Using the Phillips #1 screwdriver, secure the FH riser module to the sled with three screws.
100
Installing and removing system components