Air Duct - Dell EMC PowerEdge XE7440 Installation And Service Manual

Figure 54. Installing the FE1 card
Next steps
1. Install the air shroud (FH
2. Install the sled.
3. Follow the procedure listed in

Air duct

Removing the FE1 air duct
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
4. Remove the air shroud (FH
5. Remove the FE1 card.
Steps
Release the hook on the air duct that is attached to FE1 PCIe adapter card and lift the air duct.
88 Installing and removing system components
sled).
After working inside your
Safety instructions.
Before working inside your
sled).
system.
system.