Expansion Cards - Dell EMC PowerEdge XE7440 Installation And Service Manual

Figure 22. Installing the PCIe dummy bracket
Next steps
1. Install the sled.
2. Follow the procedure listed in

Expansion cards

NOTE: A missing or an unsupported expansion card riser logs a System Event Log (SEL) event. This does not prevent your
system from powering on and no BIOS, POST messages, or F1 or F2 pause is displayed.
PCIe slot priority
Table 7. Supported expansion options
Location Width Card
DCS_MEZZ NA
slot-1
OCP Slot-3 NA
PCIe riser DW
Slot-4
SW
PCIe Slot-5 NA
PCIe Slot-6 NA
56 Installing and removing system components
After working inside your
Bracket
length height
NA NA
NA NA
FL FH
FL FH
NA NA
NA NA
system.
Controlling CPU PCIe width
CPU1 X8
CPU1 X8
CPU1 X16
CPU1 X16
CPU2 X8
CPU2 X8
Usage
miniPERC
OCP 2.0
FE1/NV100S
CX4 NIC /
BCM57414 NIC/
T4
PERC
PERC