Cooling Fan; Removing A Cooling Fan - Dell EMC PowerEdge XE7440 Installation And Service Manual

Figure 18. Installing the air shroud (FH sled)
Next steps
1. Install the sled.
2. Follow the procedure listed in

Cooling fan

Removing a cooling fan

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
4. Remove the air shroud.
5. If required, Remove the air shroud (FH
Steps
1. Disconnect the cooling fan cable that is connected to the motherboard bridge connector.
2. Lift the cooling fan out of the cooling fan cage assembly.
52 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your
sled).
system.
system.