Pcie Adapter Card - Dell EMC PowerEdge XE7440 Installation And Service Manual

Figure 62. Installing the M.2 SSD
Next steps
1. Install the M.2 riser card.
2. Install the FE1 air duct.
3. Install the FE1 card.
4. Install the air shroud (FH
5. Install the sled.
6. Follow the procedure listed in

PCIe adapter card

Removing the PCIe adapter card
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
4. Remove the air shroud (FH
5. Remove the FE1 card.
6. Remove the FE1 air duct.
7. Remove the M.2 riser
NOTE: Temporarily label the M.2 riser cards about its location on PCIe adapter slot.
sled).
After working inside your
Safety
Before working inside your
sled).
card.
system.
instructions.
system.
Installing and removing system components 95