M.2 Riser Card - Dell EMC PowerEdge XE7440 Installation And Service Manual

Figure 56. Installing the FE1 air duct
Next steps
1. Install the FE1 card.
2. Install the air shroud (FH
3. Install the sled.
4. Follow the procedure listed in

M.2 riser card

Removing the M.2 riser card
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
4. Remove the air shroud (FH
5. Remove the FE1 card.
6. Remove the air duct.
Steps
Pull out the M.2 riser card form the PCIe adapter card.
90 Installing and removing system components
sled).
After working inside your
Safety instructions.
Before working inside your
sled).
system.
system.