Figure 65. Installing the PCIe adapter card
Next steps
1.
Install the M.2 riser
card.
2.
Install the FE1 air
duct.
3.
Install the FE1
card.
4.
Install the air shroud (FH
5.
Install the
sled.
6. Follow the procedure listed in
FHFL interposer board
Removing the FHFL interposer board
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the
sled.
4.
Remove the air shroud (FH
5.
Remove the FE1
card.
98
Installing and removing system components
sled).
After working inside your
Safety
instructions.
Before working inside your
sled).
system.
system.