Memory Specifications; Drives And Storage Specifications; Video Specifications - Dell EMC PowerEdge XE7440 Installation And Service Manual

Table 18. Expansion bus specifications (continued)
PCIe Slots
x16 M.2 riser

Memory specifications

Table 19. Memory specifications
Memory
DIMM
module
type
sockets
LRDIMM
Sixteen 288-pins
RDIMM

Drives and storage specifications

The PowerEdge XE7440 enclosure supports SAS and SATA hard drives and Solid State Drives (SSDs).
Table 20. Supported drive options for the PowerEdge XE7440 sled with enclosure
Maximum number of drives in the enclosure
100 x 3.5-inch drive systems
4 x 2.5-inch drive systems with NVMe
Upto 20 x M.2 NVMe drive (for FE1 card)
Micro-SD card (optional) for boot (up to 64 GB)

Video specifications

The PowerEdge XE7440 sled supports a Matrox G200 integrated graphics card with 16 MB RAM.
Table 21. Supported video resolution options
Resolution
1024 x 768
1280 x 800
1280 x 1024
1360 x 768
1440 x 900
128 Technical specifications
Description
Slot 5 and 6: x16 PCIe Gen3 from
processor 2
DIMM
DIMM rank
capacity
Octal rank 128 GB
Single rank 8 GB
16 GB
Dual rank 32 GB
64 GB
Refresh rate (Hz)
60
60
60
60
60
Form factor
Custom form factor (PERC card)
Single processor
Minimum Maximum
RAM RAM
128 GB 1024 GB
8 GB 64 GB
16 GB 128 GB
32 GB 256 GB
64 GB 512 GB
Maximum number of drives assigned per sled
100 SAS or SATA hard drives and SSDs per sled
The NVMe backplane supports either of these configurations:
● Two NVMe drives and two SAS or SATA hard drives or
SSDs per sled
The supported each M.2 NVMe capacity in FE1 card is up to
1.92 TB
NOTE: The FE1 card is installed on the x16 riser slot (slot
4).
One on each PCIe riser of the sled
Color depth (bits)
up to 24
up to 24
up to 24
up to 24
up to 24
Dual processors
Minimum Maximum
RAM RAM
256 GB 2048 GB
16 GB 128 GB
32 GB 256 GB
64 GB 512 GB
128 GB 1024 GB