Mini Perc Riser Board; Removing The Mini Perc Riser Board - Dell EMC PowerEdge XE7440 Installation And Service Manual

Figure 32. Connecting the mini PERC card battery
Next steps
1. Install the mini PERC card
2. Install the PCIe dummy
3. Install the air shroud.
4. Install the sled.
5. Follow the procedure listed in

Mini PERC riser board

Removing the mini PERC riser board

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
4. Remove the air shroud.
5. Remove the PCIe dummy
6. Remove the mini PERC
module.
bracket.
After working inside the
Safety instruction.
Before working inside your
bracket.
module.
system.
system.
Installing and removing system components 67