Table of Contents
Advertisement
NOTE:
When mini PERC card module is released out, mini PERC riser may be attached to system board, if the mini
PERC riser is attached to system board then remove it and attach to the mini PERC adapter board.
Figure 27. Removing the mini PERC card module
3. Loosen the two captive screws and remove the mini PERC card cable.
4. Disconnect the mini PERC battery cable.
5. Pull the mini PERC card out of the hook from the mini PERC bracket.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
62
Installing and removing system components
Hide quick links:
Advertisement
Table of Contents
