Chassis Weight; Processor Specifications; Cooling Specifications - Dell EMC PowerEdge XE7440 Installation And Service Manual

Chassis weight

Table 15. Chassis weight of the PowerEdge XE7100 enclosure with PowerEdge XE7440 and XE7420 sleds
System
Chassis weight without sled
Chassis weight with half-width sled
(XE7420)
Chassis weight with full- width full-
height sled (XE7440).
Chassis weight with full- width low-
profile sled (XE7440)

Processor specifications

The PowerEdge XE7440 sled supports up to two Intel Xeon Scalable processor in each independent sled. Each processor
supports up to 26 cores.

Cooling specifications

The PowerEdge XE7100 chassis with two PowerEdge XE7420 nodes/sleds or one PowerEdge XE7440 node/sled has 18 fans.
These are divided into three fan zones (Chassis, Node_A, and Node_B), and each zone has six fans.
The chassis fans are single rotor fans, and sled fans are dual rotor fans.
For Half-Width (HW) sled, sled 1 is Node 1 and sled 2 is Node 2.
Table 16. Fan numbering
PowerEdge systems
XE7100 - Chassis
XE7440 (Single sled)
XE7420 (Dual sleds)
NOTE: The reading and reporting of fan sensors are in the order of chassis fans, Node_A and Node_B fans, and sensors
numbering is 1-6, 7-12 and 13-18 respectively.
● For XE7420 the sled 1/ node 1 reports six chassis fan sensors (1-6) and sled 1 fan sensors (7-12).
● For XE7420 the sled 2/ node 2 reports six chassis fan sensors (1-6) and sled 2 fan sensors (13-18).
Cooling fan-mapping
Table 17. Cooling fan-mapping
Fan name and configuration
(Chassis) FAN 1
FAN 2
FAN 3
FAN 4
FAN 5
FAN 6
126 Technical specifications
Maximum weight (with all sleds and drives)
132.26 Kg (291.58 lb)
137.12 Kg (302.29 lb)
140.93 Kg (310.69 lb)
142.81 Kg (341.84 lb)
Fan numbering
1–6
7–12 , 13-18
Node_A: 7–12 , Node_B: 13-18
iDRAC sensor number
38
39
3A
3B
3C
3D