Installing The Motherboard Bridge Board (2) - Dell EMC PowerEdge XE7440 Installation And Service Manual

Figure 51. Removing the Motherboard bridge board (2)
Next steps
Install the motherboard bridge board (2).

Installing the Motherboard bridge board (2)

Prerequisites
Follow the safety guidelines listed in the Safety instructions.
Steps
1. Align and install the motherboard bridge board (2) into the motherboard bridge module bracket.
2. Using the Phillips #2 screwdriver, secure the motherboard bridge board (2) to the module bracket with three screws.
3. Connect the power cable on the motherboard bridge board (2) connector.
Installing and removing system components 85