Transmission Gear Box Assembly - Toro Greensmaster 1018 Service Manual

Transmission Gear Box Assembly

g259091
1. Truss screw (3 each)
2. Splined coupler (6 each)
3. Washer (3 each)
4. Lock nut (3 each)
5. Drive shaft
Removing the Transmission Gear Box Assembly
Traction and Reel Drive Systems: Service and Repairs
6. Engine base
7. Telescopic coupler
8. Reel drive box assembly
9. Slide adaptor
10. Jam nut
Removal of transmission gear box assembly is necessary in order to service the
internal components.
Note: Refer to Figure 32
1. Park the machine on a level surface. Ensure that the engine is OFF. Remove
the spark plug wire from the engine spark plug.
2. Disconnect the clutch cable; refer to
3. Disconnect the brake cable; refer to
4. Disconnect the reel cable; refer to
Figure 32
11.
12.
13.
during this procedure.
Removing the Clutch Cable (page
Removing the Brake Cable (page
Removing the Reel Cable (page
Page 5–24
Bolt (2 each)
Transmission gear box assembly
Compression spring
7–11).
Greensmaster ® 1018/1021/1026
18238SL Rev B
7–9).
7–6).