Engine - Toro Greensmaster 1018 Service Manual

Engine

g255888
1. Bolts (2 each)
2. Muffler guard
3. Nuts (4 each)
4. Flat washer (4 each)
5. Engine base
Removing the Engine
Gasoline Engine: Service and Repairs
6. Carriage bolts (4 each)
7. Transmission gear box
8. Bolt (4 each)
9. Washer (4 each)
10. Clutch hub clamp
Note: Refer to Figure 13
1. Park the machine on a level surface with the engine OFF. Remove the spark
plug wire from the spark plug to prevent the engine from starting. Close
the fuel shut-off valve on the engine.
2. If the engine is to be disassembled, it may be easier to drain oil from engine
before removing the engine from the traction unit.
Figure 13
11.
12.
13.
14.
15.
during this procedure.
Page 4–8
Lock nuts (2 each)
Clutch cover
Bolt (2 each)
Engine
Bolt (2 each)
Greensmaster ® 1018/1021/1026
18238SL Rev B