Toro Greensmaster 1018 Service Manual page 116

Removing the Reel Cable (continued)
Controls, Wheels and Accessories : Service and Repairs
g262054
1. Retaining ring
2. Reel selector assembly
3. Remove the reel cable (item 4 in
(2) as follows:
A. Loosen the front cable jam nut (3) and lift the reel cable (4) from the
casting slot of the engine base.
B. Remove the retaining ring (1) that secures the reel cable eyelet to the reel
selector assembly (2) and slide the reel cable eyelet from the selector
assembly.
4. Remove the control cover and lower cover from the handle assembly to allow
access to upper end of the reel cable.
5. Remove the reel cable (item 1 in
as follows:
A. Loosen the lower cable jam nut (2) that secures the reel cable (1) to the
upper receiver weldment (12). Slide the cable from the upper receiver
weldment.
B. Remove the cable spring (3) from the clevis connector (10) on the reel
lever assembly (5). Note the orientation of cable spring hook on the shaft
assembly for assembly purposes.
6. Remove the reel cable (1) from the machine.
Figure 55
3. Jam nut
4. Reel cable
Figure 55) from the reel selector assembly
Figure 54) from the traction lever assembly
Page 7–12 Greensmaster ® 1018/1021/1026
18238SL Rev B