Toro Greensmaster 1018 Service Manual page 132

Removing the Transport Wheel (continued)
Disassembling the Transport Wheel
Controls, Wheels and Accessories : Service and Repairs
g200276
1. Wheel retaining lever
3. Pivot the wheel retaining lever away from the center of the wheel. Slide the
transport wheel off the wheel hex shaft.
g261682
1. Wheel hex shaft
1. Ensure that the tire is fully deflated before disassembly of the wheel.
2. Remove the 3 bolts and 3 lock washers from the shallow rim and hub.
Remove the hub from the deep rim.
3. Inspect the hub bushing. Replace the bushing, if worn or damaged.
4. Remove the 4 bolts and 4 flange nuts from the deep rim and shallow rim.
Remove the shallow rim from the deep rim.
5. Separate the tire, tube and deep rim.
6. If necessary, remove the shoulder screws, torsion spring, and retaining lever
from the hub.
Figure 64
Figure 65
Page 7–28 Greensmaster ® 1018/1021/1026
18238SL Rev B