Drum Drive Gear Box Assembly
g258813
1.
Transmission gear box assembly
2.
Traction drum
3.
Splined coupler (2 each)
4.
Washer
Removing the Drum Drive Gear Box Assembly
Greensmaster
®
1018/1021/1026
18238SL Rev B
5.
Lock nut
6.
Shoulder bolt (3 each)
7.
RH hex shaft
8.
Drum drive gear box assembly
Note: Refer to
Figure 25
1. Park the machine on a level surface. Ensure that the engine is OFF. Remove
the spark plug wire from the engine spark plug.
2. Remove the transport wheel if attached; refer to
Wheel (page
7–27).
Note: Support the machine on kickstand during this operation.
3. Move the traction engage/disengage lever to the disengage position to
remove torque from the drum drive gears.
Figure 25
10.
11.
during this procedure.
Page 5–11
Traction and Reel Drive Systems: Service and Repairs
9.
Frame assembly
Shoulder bolt
Truss screw
Removing the Transport