Toro Greensmaster 1018 Service Manual page 70

Assembly of Drum Drive Gear Box Assembly (continued)
Installing the Drum Drive Gear Box Assembly
Traction and Reel Drive Systems: Service and Repairs
12. Install the drum drive cover (14) to the drum drive housing (25) and secure
with 5 socket head screws (15). Torque tighten the socket head screws to
1.7 to 4.5 N∙m (15 to 40 in-lb). Use an alternation pattern and torque tighten
the socket head screws to 9.6 to 10.7 N∙m (85 to 95 in-lb).
13. Fill the drum drive gear box assembly with 10 oz (0.56 lb) of Mobil SCH007
grease.
14. Torque tighten the hollow plugs (16) from 12.4 to 14.6 N·m (110 to 130 in-lb).
1. If removed, apply a coat of loctite (blue) to threads of the hexagonal shaft (7).
Install the hexagonal shaft (item 7 in
assembly (8). Torque tighten the hexagonal shaft to 67.7 N·m (50 ft-lb).
2. Apply a light coat of grease and install the O-ring (29) to the drum drive
housing (25).
3. Install the drum drive gear box assembly (8) to the frame assembly (9) and
secure with the shoulder bolt (10).
4. Install the drum drive gear box assembly (8) to the traction drum (2) and
secure with the 3 shoulder bolts (6).
5. Install the 2 splined couplers onto the transmission gear box assembly (1)
and drum drive gear box assembly (8) and secure with the truss screw (11),
2 washers (4) and nut (5).
6. Torque tighten the truss screw (11) to 10 to 12.4 N∙m (90 to 110 in-lb).
7. If required, install the transport wheels; refer to
(page 7–29).
8. Attach the spark plug wire to the spark plug.
Figure
Page 5–16
25) to the drum drive gear box
Installing the Transport Wheel
Greensmaster ® 1018/1021/1026
18238SL Rev B