Engine Base - Toro Greensmaster 1018 Service Manual

Engine Base

g256199
1. Engine base
2. Slider adapter
3. Jam nut
4. Flat head nut
Removing the Engine Base
Gasoline Engine: Service and Repairs
5. Flat washer (2 each)
6. Frame assembly
7. Bolt
8. Tube clamp
Note: Refer to Figure 16
1. Park the machine on a level surface with the engine OFF. Remove the spark
plug wire from the spark plug to prevent the engine from starting. Close
the fuel shut-off valve on the engine.
2. Remove the throttle cable; refer to
3. Remove the clutch cable; refer to
4. Remove the brake cable; refer to
5. Remove the reel cable; refer to
Figure 16
10.
11.
12.
during this procedure.
Removing the Throttle Cable (page
Removing the Clutch Cable (page
Removing the Brake Cable (page
Removing the Reel Cable (page
Page 4–12
9. Flat head bolt (5 each)
Transmission gear box assembly
Nut
Jack screw
7–11).
Greensmaster ® 1018/1021/1026
18238SL Rev B
7–3).
7–9).
7–6).