Replacing The Brake Cable - Toro Greensmaster 1018 Service Manual

Replacing the Brake Cable

g261822
1. Shoulder screw
2. Flange bushing (2 each)
3. Lever
Removing the Brake Cable
Controls, Wheels and Accessories : Service and Repairs
4. Upper receiver weldment
5. Flange nut
6. Handle assembly
Note: Refer to Figure 50
1. Park the machine on a level surface. Ensure that the engine is OFF and the
traction control is in NEUTRAL and parking brake is released.
2. Remove the spark plug wire from the engine spark plug.
Figure 50
during this procedure.
Page 7–6
7. Brake cable spring
8. Jam nut
9. Brake cable
Greensmaster ® 1018/1021/1026
18238SL Rev B