Toro Greensmaster 1018 Service Manual page 85

Assembling the Transmission Gear Box Assembly
Greensmaster ® 1018/1021/1026
18238SL Rev B
g259789
1. Ball bearing (2 each)
2. Spacer
1. Use a press to install the spacer (item 13 in
(12 and 25) into the transmission housing (26).
2. Install the retaining ring (item 5 in
(26).
3. Install the new grease seal (item 11 in
housing (26). Ensure that the seal lip is orientated toward the center of the
transmission housing. Press the seal into the transmission housing bore so
that the seal is flush to the edge of the transmission housing.
4. Install the new oil seal (item 6 in
Ensure that the seal lip is orientated toward the center of the transmission
housing. Press the seal into the transmission housing bore so that the seal
is flush to the edge of the transmission housing.
5. Install the new oil seal (item 14 in
Ensure that the seal lip is orientated toward the center of the transmission
housing. Press the seal into the transmission housing bore so that the seal
is flush to the edge of the transmission housing.
6. Press the flange bushings (item 7 in
(26).
Figure 36
3. Grease seal
4. Straight bushing (2 each)
Figure 33) into the transmission housing
Figure
Figure 33) into the transmission housing.
Figure 33) into the transmission housing.
Figure
Page 5–31 Traction and Reel Drive Systems: Service and Repairs
Figure 33) and new ball bearings
33) into the transmission
33) into the transmission housing