Service And Repairs; Replacing The Throttle Cable - Toro Greensmaster 1018 Service Manual

Service and Repairs

Replacing the Throttle Cable

g261770
1. Upper receiver weldment
2. Lock nut (2 each)
3. Throttle cable
4. Bolt
Removing the Throttle Cable
Greensmaster ® 1018/1021/1026
18238SL Rev B
5. Compression spring
6. Delta screw
7. Throttle lever
8. Flange bushing (2 each)
Note: Refer to Figure 48
1. Park the machine on a level surface. Ensure that the engine is OFF and
the traction control is in NEUTRAL.
Figure 48
10.
11.
12.
during this procedure.
Page 7–3 Controls, Wheels and Accessories : Service and Repairs
9. Throttle arm
Flange nut
Handle assembly
Washer