Toro Greensmaster 1018 Service Manual page 52

Removing the Engine Base (continued)
g256200
1. Flat head nut
2. Compression spring
3. Reel selector hub
4. Retaining ring
5. Reel selector shaft
6. Extension spring
7. Flange bushing
8. Reel bellcrank
Gasoline Engine: Service and Repairs
9. Washer (3 each)
10. Long reel lever
11. Straight bushing
12. Short reel lever
13. Flat head bolt
14. Nut
15. Socket head screw
16. Engine base
15. Carefully remove the nut (1 in
secures the reel selector hub (3) to the reel selector shaft (5). Remove the
reel selector hub.
16. Carefully remove the extension spring (6) from the long and short reel levers
(10 and 12).
17. Remove the bolt (13) that secures the reel selector shaft (5) to the engine
base (16).
18. Remove the washer (9), long reel lever (10), washer (9), short reel lever (12),
washer (9) and reel bellcrank (8) from the reel selector shaft (5).
Figure 17
17.
18.
19.
20.
21.
22.
23.
Figure 17) and compression spring (2) that
Page 4–14
Nut
Carriage bolt
Engine mount bracket
Bolt
Cable guide
Washer
Washer
Greensmaster ® 1018/1021/1026
18238SL Rev B