Toro Greensmaster 1018 Service Manual page 124

Disassembling the Handle Assembly (continued)
g260771
1. LH bail bracket
2. Bolt (2 each)
3. Flange bushing (4 each)
4. Clutch bail assembly
5. Clutch bail link
6. Compression spring
7. Handle mount
Controls, Wheels and Accessories : Service and Repairs
26. If necessary, remove the 3 nuts (15), 3 bolts (21) and 3 spacers (20) from the
upper receiver weldment (8).
8. Flange nut (4 each)
9. Cotter pin
10. Conduit clamp (2 each)
11. Socket head screw (2 each)
12. Flange bushing(2 each)
13. Clevis pin
14. Nut (2 each)
27. Remove the 2 nuts (item 8 in
handle (20) to handle mount (7). Remove the handle from the clutch bail
assembly and the handle mount.
28. If necessary, remove the 2 screws (18) that secures the LH and RH bail
brackets (1 and 19) to the handle (20).
Figure 59
15.
16.
17.
18.
19.
20.
21.
Figure 59) and 2 bolts (21) that secures the
Page 7–20
Upper receiver weldment
Bolt (2 each)
Spacer (2 each)
Delta screw (2 each)
RH bail bracket
Handle
Bolt (2 each)
Greensmaster ® 1018/1021/1026
18238SL Rev B