Installing the Cutting Unit Assembly
Greensmaster
®
1018/1021/1026
18238SL Rev B
1. If removed, install the dowel pins (4) into the frame assembly (5).
2. If removed, install the reel drive assembly (2) onto the cutting unit assembly
(item 1); refer to
Installing the Reel Drive Assembly (page
3. Install the cutting unit assembly (1) onto the frame assembly (5).
4. Secure the cutting unit assembly (1) with 4 socket head screws (3).
5. Align the reel drive assembly shaft to transmission gear box driveshaft. Slide
the telescopic coupler on the reel drive assembly (2) to the transmission
gear shaft.
6. Attach the spark plug wire to the engine spark plug.
Page 8–17
5–10).
DPA Cutting Units: Service and Repairs