Power Control And Operator Panel Mode Switch - Fujitsu SPARC Enterprise M3000 Product Notes

To connect the USB memory to the USB port for XSCF, connect the USB memory
directly to the USB port. If connected via USB hub or USB extension cables, it may
cause errors.
Power Control and Operator Panel Mode
Switch
You can use the mode switch on the operator panel to switch between system
power-on/off when you use the remote power control utilizing the RCI function or
the automatic power control system (APCS).
For details, see the "Limitations and Cautions" in "Preface" of the SPARC Enterprise
M3000 Server Service Manual.
Information About Hardware 11