Installing The Lcd Attendant Console - Mitel SX-200 Practices

El .
Attendant Console
10 DISPLAY ASSCCIATWE
KEYS (SOFWEYS)
I
I
FRI. JAN. 27,lSS9
w
I=
F7>
m
Fl> 0 lF2> 0 Fb 0 F4' 0 IFS>
41
7m
14AllENDANl'COt60LE 12 DlALKEY.5
lND!CATORS
KEYS (FIXED KEYS) 2 VOLUME CONROL KEYS
2 CONTFMT CONlROL KEYS
4 CURSOR CONTixlL KEYS
CC4030
Figure 2-2 Attendant Console Keyboard Layout
Installing The LCD Attendant Console
1 WARNING 1
Any connection of this console to an off premise application, an out of plant
applkation, or to any other exposed plant appkation may result In a safety
hazard, and/or defective operation, and/or equipment damage.
Notes: 1. The LCD attendant console interfaces to the universal control card through a
console module in any position. A universal card can support a maximum of two
console modules.
2. The system maximum is 11 consoles.
3, A maintenance teminal is programmed by default in bay 2, slot 3, circuit 1 (336-
and 456-part) or Bay 1, Slot 5, Circuit 1 (672-part). An LCD console may be
9109-096-l 26-NA Issue 1
Revision 0
126 2-3